You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

78 lines
2.6 KiB

// Demo program for testing library and board - flip the switch to turn on/off buzzer
#include <Adafruit_CircuitPlayground.h>
// we light one pixel at a time, this is our counter
uint8_t pixeln = 0;
void setup() {
//while (!Serial);
Serial.begin(9600);
Serial.println("Circuit Playground test!");
CircuitPlayground.begin();
}
void loop() {
// test Red #13 LED
CircuitPlayground.redLED(HIGH);
delay(100);
CircuitPlayground.redLED(LOW);
delay(100);
/************* TEST CAPTOUCH */
Serial.print("Capsense #3: "); Serial.println(CircuitPlayground.readCap(3));
Serial.print("Capsense #2: "); Serial.println(CircuitPlayground.readCap(2));
if (! CircuitPlayground.isExpress()) { // CPX does not have this captouch pin
Serial.print("Capsense #0: "); Serial.println(CircuitPlayground.readCap(0));
}
Serial.print("Capsense #1: "); Serial.println(CircuitPlayground.readCap(1));
Serial.print("Capsense #12: "); Serial.println(CircuitPlayground.readCap(12));
Serial.print("Capsense #6: "); Serial.println(CircuitPlayground.readCap(6));
Serial.print("Capsense #9: "); Serial.println(CircuitPlayground.readCap(9));
Serial.print("Capsense #10: "); Serial.println(CircuitPlayground.readCap(10));
/************* TEST SLIDE SWITCH */
if (CircuitPlayground.slideSwitch()) {
Serial.println("Slide to the left");
} else {
Serial.println("Slide to the right");
CircuitPlayground.playTone(500 + pixeln * 500, 100);
}
/************* TEST 10 NEOPIXELS */
CircuitPlayground.setPixelColor(pixeln++, CircuitPlayground.colorWheel(25 * pixeln));
if (pixeln == 11) {
pixeln = 0;
CircuitPlayground.clearPixels();
}
/************* TEST BOTH BUTTONS */
if (CircuitPlayground.leftButton()) {
Serial.println("Left button pressed!");
}
if (CircuitPlayground.rightButton()) {
Serial.println("Right button pressed!");
}
/************* TEST LIGHT SENSOR */
Serial.print("Light sensor: ");
Serial.println(CircuitPlayground.lightSensor());
/************* TEST SOUND SENSOR */
Serial.print("Sound sensor: ");
Serial.println(CircuitPlayground.mic.soundPressureLevel(10));
/************* TEST ACCEL */
// Display the results (acceleration is measured in m/s*s)
Serial.print("X: "); Serial.print(CircuitPlayground.motionX());
Serial.print(" \tY: "); Serial.print(CircuitPlayground.motionY());
Serial.print(" \tZ: "); Serial.print(CircuitPlayground.motionZ());
Serial.println(" m/s^2");
/************* TEST THERMISTOR */
Serial.print("Temperature ");
Serial.print(CircuitPlayground.temperature());
Serial.println(" *C");
}