You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
240 lines
7.7 KiB
240 lines
7.7 KiB
/*
|
|
* Firmata is a generic protocol for communicating with microcontrollers
|
|
* from software on a host computer. It is intended to work with
|
|
* any host computer software package.
|
|
*
|
|
* To download a host software package, please click on the following link
|
|
* to open the list of Firmata client libraries in your default browser.
|
|
*
|
|
* https://github.com/firmata/arduino#firmata-client-libraries
|
|
*/
|
|
|
|
/*
|
|
Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved.
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
See file LICENSE.txt for further informations on licensing terms.
|
|
*/
|
|
|
|
/*
|
|
* This is an old version of StandardFirmata (v2.0). It is kept here because
|
|
* its the last version that works on an ATMEGA8 chip. Also, it can be used
|
|
* for host software that has not been updated to a newer version of the
|
|
* protocol. It also uses the old baud rate of 115200 rather than 57600.
|
|
*/
|
|
|
|
#include <EEPROM.h>
|
|
#include <Firmata.h>
|
|
|
|
/*==============================================================================
|
|
* GLOBAL VARIABLES
|
|
*============================================================================*/
|
|
|
|
/* analog inputs */
|
|
int analogInputsToReport = 0; // bitwise array to store pin reporting
|
|
int analogPin = 0; // counter for reading analog pins
|
|
|
|
/* digital pins */
|
|
byte reportPINs[TOTAL_PORTS]; // PIN == input port
|
|
byte previousPINs[TOTAL_PORTS]; // PIN == input port
|
|
byte pinStatus[TOTAL_PINS]; // store pin status, default OUTPUT
|
|
byte portStatus[TOTAL_PORTS];
|
|
|
|
/* timer variables */
|
|
unsigned long currentMillis; // store the current value from millis()
|
|
unsigned long previousMillis; // for comparison with currentMillis
|
|
|
|
|
|
/*==============================================================================
|
|
* FUNCTIONS
|
|
*============================================================================*/
|
|
|
|
void outputPort(byte portNumber, byte portValue)
|
|
{
|
|
portValue = portValue & ~ portStatus[portNumber];
|
|
if (previousPINs[portNumber] != portValue) {
|
|
Firmata.sendDigitalPort(portNumber, portValue);
|
|
previousPINs[portNumber] = portValue;
|
|
Firmata.sendDigitalPort(portNumber, portValue);
|
|
}
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* check all the active digital inputs for change of state, then add any events
|
|
* to the Serial output queue using Serial.print() */
|
|
void checkDigitalInputs(void)
|
|
{
|
|
byte i, tmp;
|
|
for (i = 0; i < TOTAL_PORTS; i++) {
|
|
if (reportPINs[i]) {
|
|
switch (i) {
|
|
case 0: outputPort(0, PIND & ~ B00000011); break; // ignore Rx/Tx 0/1
|
|
case 1: outputPort(1, PINB); break;
|
|
case 2: outputPort(2, PINC); break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// -----------------------------------------------------------------------------
|
|
/* sets the pin mode to the correct state and sets the relevant bits in the
|
|
* two bit-arrays that track Digital I/O and PWM status
|
|
*/
|
|
void setPinModeCallback(byte pin, int mode) {
|
|
byte port = 0;
|
|
byte offset = 0;
|
|
|
|
if (pin < 8) {
|
|
port = 0;
|
|
offset = 0;
|
|
} else if (pin < 14) {
|
|
port = 1;
|
|
offset = 8;
|
|
} else if (pin < 22) {
|
|
port = 2;
|
|
offset = 14;
|
|
}
|
|
|
|
if (pin > 1) { // ignore RxTx (pins 0 and 1)
|
|
pinStatus[pin] = mode;
|
|
switch (mode) {
|
|
case INPUT:
|
|
pinMode(pin, INPUT);
|
|
portStatus[port] = portStatus[port] & ~ (1 << (pin - offset));
|
|
break;
|
|
case OUTPUT:
|
|
digitalWrite(pin, LOW); // disable PWM
|
|
case PWM:
|
|
pinMode(pin, OUTPUT);
|
|
portStatus[port] = portStatus[port] | (1 << (pin - offset));
|
|
break;
|
|
//case ANALOG: // TODO figure this out
|
|
default:
|
|
Firmata.sendString("");
|
|
}
|
|
// TODO: save status to EEPROM here, if changed
|
|
}
|
|
}
|
|
|
|
void analogWriteCallback(byte pin, int value)
|
|
{
|
|
setPinModeCallback(pin, PIN_MODE_PWM);
|
|
analogWrite(pin, value);
|
|
}
|
|
|
|
void digitalWriteCallback(byte port, int value)
|
|
{
|
|
switch (port) {
|
|
case 0: // pins 2-7 (don't change Rx/Tx, pins 0 and 1)
|
|
// 0xFF03 == B1111111100000011 0x03 == B00000011
|
|
PORTD = (value & ~ 0xFF03) | (PORTD & 0x03);
|
|
break;
|
|
case 1: // pins 8-13 (14,15 are disabled for the crystal)
|
|
PORTB = (byte)value;
|
|
break;
|
|
case 2: // analog pins used as digital
|
|
PORTC = (byte)value;
|
|
break;
|
|
}
|
|
}
|
|
|
|
// -----------------------------------------------------------------------------
|
|
/* sets bits in a bit array (int) to toggle the reporting of the analogIns
|
|
*/
|
|
//void FirmataClass::setAnalogPinReporting(byte pin, byte state) {
|
|
//}
|
|
void reportAnalogCallback(byte pin, int value)
|
|
{
|
|
if (value == 0) {
|
|
analogInputsToReport = analogInputsToReport & ~ (1 << pin);
|
|
}
|
|
else { // everything but 0 enables reporting of that pin
|
|
analogInputsToReport = analogInputsToReport | (1 << pin);
|
|
}
|
|
// TODO: save status to EEPROM here, if changed
|
|
}
|
|
|
|
void reportDigitalCallback(byte port, int value)
|
|
{
|
|
reportPINs[port] = (byte)value;
|
|
if (port == 2) // turn off analog reporting when used as digital
|
|
analogInputsToReport = 0;
|
|
}
|
|
|
|
/*==============================================================================
|
|
* SETUP()
|
|
*============================================================================*/
|
|
void setup()
|
|
{
|
|
byte i;
|
|
|
|
Firmata.setFirmwareVersion(2, 0);
|
|
|
|
Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
|
|
Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback);
|
|
Firmata.attach(REPORT_ANALOG, reportAnalogCallback);
|
|
Firmata.attach(REPORT_DIGITAL, reportDigitalCallback);
|
|
Firmata.attach(SET_PIN_MODE, setPinModeCallback);
|
|
|
|
portStatus[0] = B00000011; // ignore Tx/RX pins
|
|
portStatus[1] = B11000000; // ignore 14/15 pins
|
|
portStatus[2] = B00000000;
|
|
|
|
// for(i=0; i<TOTAL_PINS; ++i) { // TODO make this work with analogs
|
|
for (i = 0; i < 14; ++i) {
|
|
setPinModeCallback(i, OUTPUT);
|
|
}
|
|
// set all outputs to 0 to make sure internal pull-up resistors are off
|
|
PORTB = 0; // pins 8-15
|
|
PORTC = 0; // analog port
|
|
PORTD = 0; // pins 0-7
|
|
|
|
// TODO rethink the init, perhaps it should report analog on default
|
|
for (i = 0; i < TOTAL_PORTS; ++i) {
|
|
reportPINs[i] = false;
|
|
}
|
|
// TODO: load state from EEPROM here
|
|
|
|
/* send digital inputs here, if enabled, to set the initial state on the
|
|
* host computer, since once in the loop(), this firmware will only send
|
|
* digital data on change. */
|
|
if (reportPINs[0]) outputPort(0, PIND & ~ B00000011); // ignore Rx/Tx 0/1
|
|
if (reportPINs[1]) outputPort(1, PINB);
|
|
if (reportPINs[2]) outputPort(2, PINC);
|
|
|
|
Firmata.begin(115200);
|
|
}
|
|
|
|
/*==============================================================================
|
|
* LOOP()
|
|
*============================================================================*/
|
|
void loop()
|
|
{
|
|
/* DIGITALREAD - as fast as possible, check for changes and output them to the
|
|
* FTDI buffer using Serial.print() */
|
|
checkDigitalInputs();
|
|
currentMillis = millis();
|
|
if (currentMillis - previousMillis > 20) {
|
|
previousMillis += 20; // run this every 20ms
|
|
/* SERIALREAD - Serial.read() uses a 128 byte circular buffer, so handle
|
|
* all serialReads at once, i.e. empty the buffer */
|
|
while (Firmata.available())
|
|
Firmata.processInput();
|
|
/* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over
|
|
* 60 bytes. use a timer to sending an event character every 4 ms to
|
|
* trigger the buffer to dump. */
|
|
|
|
/* ANALOGREAD - right after the event character, do all of the
|
|
* analogReads(). These only need to be done every 4ms. */
|
|
for (analogPin = 0; analogPin < TOTAL_ANALOG_PINS; analogPin++) {
|
|
if ( analogInputsToReport & (1 << analogPin) ) {
|
|
Firmata.sendAnalog(analogPin, analogRead(analogPin));
|
|
}
|
|
}
|
|
}
|
|
}
|